Cyanide Photometer with 585 nm LED
Cyanide is a pollutant that originates mostly from metallurgical and galvanic industrial plants.
Cyanide is extremely poisonous to the human nervous system, and it is therefore imperative to monitor and control its level in potable water.
Continuous monitoring in waste effluents is required, and cyanide is removed using alkaline chlorination procedures.
Due to this, European norms limit the concentration of cyanide in drinking water to 0.05 mg/L, while the EPA has established that the maximum level is not to exceed 0.2 mg/L.
HANNA®’ HI 93714 is the first electronic instrument of its kind to determine cyanide concentrations in water.
The ideal replacement to test kits, HI 93714 will provide you with fast and accurate measurements at the touch of a button.
HI 93714 is supplied with 2 cuvets, battery and instructions.
|Range||0.000 to 0.200 mg/L|
|Accuracy||±0.005 mg/L ±3% of reading|
|Light Source||LED 585 nm|
|Light Life||Life of the instrument|
|Light Detection||Silicon Photocell|
|Battery Type / Life||1 x 9V / approx. 40 hours of continuous use; auto-off after 10 minutes of non use|
|Environment||0 to 50°C (32 to 122°F); RH max 95% non-condensing|
|Dimensions||180 x 83 x 46 mm (7.1 x 3.3 x 1.8″)|
|Weight||290 g (10 oz.)|
|Method||Adaptation of the Standard Methods for the Examination of Water and Wastewater, 18th ed.|
The reation between cyanide and reagents causes a blue tint in the sample
|HI 93703-50||Solution for Cleaning Cuvets|
|HI 731321||Glass Cuvet for HI 937xx & HI 832xx Series Meters|
|HI 731325||Cuvet Cap Turbidity Meters & HI 937xx Series Meters|
|HI 710009||Shockproof Boot, Blue|
|HI 710010||Shockproof Boot, Orange|
|HI 731318||Tissue for Wiping Cuvets|
|Reagents & Standards|
|HI 93714-01||Cyanide, Pyridine-Pyrazalone Method (100 Tests)|
|HI 93714-03||Cyanide, Pyridine-Pyrazalone Method (300 Tests)|