Nickel Photometer with 555 nm LED
Nickel is commonly utilized by the electroplating industry in processes utilizing stainless steel, cobalt or nickel alloys.
Even though nickel is regarded as non-toxic to human, concentrations found in wastewater exceeding 0.5 mg/L can cause damage to certain plants and aquatic life.
Nickel is also used in batteries, fuel cells and hydrogenation of vegetable oils in the food industry.
HANNA® offers two different meters to measure nickel:HI 93726 for high range (0.00 to 7.00 g/L) and HI 93740 for low range (0.000 to 1.000 mg/L), both with outstanding accuracy given by internal microprocessor calibration.
Both the high and low range nickel meters have been designed to be comfortably handled.
They weigh less than 300g (11 oz.) and their long battery life make them ideal for field measurements.
HI 93726 is supplied with 2 cuvets, battery and instructions.
|Range||0.00 to 7.00 g/L|
|Accuracy||±4% of reading|
|Light Source||LED 555 nm|
|Light Life||Life of the instrument|
|Light Detection||Silicon Photocell|
|Battery Type / Life||1 x 9V / approx. 40 hours of continuous use; auto-off after 10 minutes of non use|
|Environment||0 to 50°C (32 to 122°F); RH max 95% non-condensing|
|Dimensions||180 x 83 x 46 mm (7.1 x 3.3 x 1.8″)|
|Weight||290 g (10 oz.)|
|Method||adaptation of the photometric method; The reaction between nickel and the reagent causes a blue tint in the sample|
|HI 93703-50||Solution for Cleaning Cuvets|
|HI 731325||Cuvet Cap Turbidity Meters & HI 937xx Series Meters|
|HI 710009||Shockproof Boot, Blue|
|HI 710010||Shockproof Boot, Orange|
|HI 731318||Tissue for Wiping Cuvets|
|HI 731321||Glass Cuvet for HI 937xx & HI 832xx Series Meters|
|Reagents & Standards|
|HI 93726-01||Nickel HR, Photometric Method (100 Tests)|
|HI 93726-03||Nickel HR, Photometric Method (300 Tests)|
|HI 93740-01||Nickel LR, PAN Method (100 Tests)|
|HI 93740-03||Nickel LR, PAN Method (300 Tests)|