Copper Photometer with 555 nm LED
Copper is found in effluents and natural water both as suspended solids and salt.
A high concentration is toxic for plants and animals, which accounts for its rigorous monitoring by the authorities and in industry.
Lower concentrations are often employed to contain the growth of plankton and algae.
Ion selective electrodes used for measuring copper quickly become tarnished and need to be polished frequently or stored in costly EDTA solution for 1-2 days and suffer from temperature changes. On the other end of the scale, test kits are low-cost but highly inaccurate.
HANNA® offers an affordable meter with a custom microprocessor and large LCD as a viable alternative: HI 93702 with a resolution of 0.01 mg/L.
HI 93702 is supplied with 2 cuvets, battery and instructions.
|Range||0.00 to 5.00 mg/L|
|Accuracy||±0.02 mg/L ±4% of reading|
|Light Source||LED 555 nm|
|Light Life||Life of the instrument|
|Light Detection||Silicon Photocell|
|Battery Type / Life||1 x 9V / approx. 40 hours of continuous use; auto-off after 10 minutes of non use|
|Environment||0 to 50°C (32 to 122°F); RH max 95% non-condensing|
|Dimensions||180 x 83 x 46 mm (7.1 x 3.3 x 1.8″)|
|Weight||290 g (10 oz.)|
|Method||Adaptation of the EPA approved method. The reaction between copper and the bicinchoninate reagents causes a purple tint in the sample.|
|HI 710009||Shockproof Boot, Blue|
|HI 710010||Shockproof Boot, Orange|
|HI 731318||Tissue for Wiping Cuvets|
|HI 731321||Glass Cuvet for HI 937xx & HI 832xx Series Meters|
|Reagents & Standards|
|HI 93702-01||Copper HR, bicichoninate acid method (100 Tests)|
|HI 93702-03||Copper HR, bicichoninate acid method (300 Tests)|
|คู่มือภาษาไทยเครื่องโฟโตมิเตอร์-ทองแดง (Copper Photometer 0.00- 5.00 mg/L)|