Main Menu


อุปกรณ์วัด Tube Test (NANOCOLOR® T-SET)

Electronic temperature control and calibration of heating blocks
  • NANOCOLOR® T-Set – Electronic temperature sensor for
    • inspection equipment monitoring
    • analytical quality control according to GLP
  • inclusive NANOCOLOR® T-Set software for
    • recording of heating curves
    • transfer of test and calibration data to PC
    • creation of certificates and protocols
    • programming of heating blocks
tset Electronic temperature sensor for temperature control and calibration

For consistent analytical quality control in water analysis the accuracy of the temperature of heating blocks has to be checked. With the NANOCOLOR® T-Set the programmed temperatures of the heating blocks NANOCOLOR® VARIO 3 andNANOCOLOR® VARIO compact from MACHEREY-NAGEL can easily be tested and calibrated in case of deviation.

Functions T-Set

Temperature control
All temperatures programmed in the heating block are measured by the NANOCOLOR® T-Set, displayed and stored in the heating block.

All temperatures programmed in the heating block are measured by the NANOCOLOR® T-Set, displayed, calibrated and stored in the heating block.

Quick and easy
  1. Connect RS 232 plug of the T-Set with the interface of the heating block
  1. Stick the temperature sensor into the small hole on the safety cover of the heating block
  1. Switch on the heating block while pressing and holding down the °C-key
  1. Start the programme with the OK-key
Functions T-Set software

With the NANOCOLOR® T-Set software heating curves can be recorded to check the temperature stability of the heating blocks and temperatures and heating times can easily be programmed in the heating blocks via PC. Furthermore, test and calibration data measured with the NANOCOLOR® T-Set can be transferred to PC. Certificates and protocols are issued automatically by the NANOCOLOR® T-Set software just by pressing one button.

Technical data
Detector: PT 1000 (95 x ø 4 mm)
Resolution: ± 0.1 °C
Display: via LED-Displays of the heating block and NANOCOLOR® T-Set software
Operation: via foil-covered symbol keys of the heating block and NANOCOLOR® T-Set software
Temperature range: 0 – 200 °C
Accuracy: ± 0.2 °C
Long-term stability: ± 0.1 °C
Interface: bidirectional serial RS 232
Operating range: 0 – 50 °C, up to 90 % rel. humidity
Power supply: via RS 232
Power consumption: max. 20 mW
Dimensions: 112 cm (length) incl. cable
Weight: approx. 60 g
Marking: CE
Certificate: calibrated with standard calibration thermometer
Warranty: 2 years
Declaration of conformity:
This instrument conforms to the following directives:
-89/336/EC of 03.05.1989 (including Amendment Directive 92/31/EC) – EMC Directive
Ordering information
Electronic temperature sensor incl. software-CD, certificate and manual
Cat. No. 919 917
  • สนใจขอใบเสนอราคาและสั่งซื้อสินค้า

    บริษัท ไฮเออร์ เอ็นท์เตอร์ไพรส์ จำกัด
    131 อุทยานวิทยาศาสตร์ประเทศไทย อาคารกลุ่มนวัตกรรม 1 
    ต. คลองหลวง อ.คลองหลวง จ. ปทุมธานี 12120
    โทร. 081-847-6768, 02-191-3928 แฟ็กซ์. 02-191-3929 

    คุณโทณิวัฒน์ 085-811-4779 , คุณนารีรัตน์ 085-814-9653

    E-mail : , IDline: @alltestkit


    >> ขอใบเสนอราคาแบบออนไลน์ คลิก !! <<