Main Menu
สถิติเยี่ยม
  • หน้าแรก>>Products>>อุปกรณ์วัดpH/ORP>>อุปกรณ์วัด pH/ORP (Portable pH/ORP Meter)>>อุปกรณ์วัด pH (meter Portable pH / ORP / ISE Graphic Display Calibration Check ™ and USB inter
  • header_20130403091319.jpg

    อุปกรณ์วัด pH (meter Portable pH / ORP / ISE Graphic Display Calibration Check ™ and USB interface, ISE user-selectable body IP67 sealed)

    HI 98185
    meter Portable pH / ORP / ISE Graphic Display Calibration Check ™ and USB interface, ISE user-selectable body IP67 sealed

    HI 98185 is the new portable meter for pH, ORP and Ion Selective HANNA.
    Thanks to the exclusive Calibration Check ™, the status of the pH electrode is kept under control and the user is alerted in case of significant changes, to avoid calibration errors due to electrode pads dirty or contaminated.
    keeps tool displays the condition of the electrode, and through messages “OUT OF RANGE CALIBRATION” to alert the user if the measure is too far from the calibration points.
    To Analysis of Ion Selective, HI 98 185 is used to select the unit of measurement (ppm, ppt, g / l, ppb, ug / l, mg / ml, M, mol / l mmol / l,% w / v, user), both the type of electrode (ammonium bromides, cadmium, calcium, carbon dioxide, chlorides, copper, fluoride, iodide, lead, nitrates, potassium, silver, sulphates and sulphides). This tool allows a pH calibration up to 5 points with 7 memorized buffers and 5 other values ​​set by the user.
    ISE for calibration are available up to 5 calibration points and six standard solutions. The large backlit graphic display allows to control multiple parameters at the same time as the temperature, the battery charge, the calibration points.
    The instrument is equipped with a system for inductive charging of the batteries which, devoid of external contacts, ensures the seal of this product.
    HI98185 can store up to 300 readings on request (parameter 100) and USB-HI92000 software you can transfer the data to the PC.

    Specifications HI 98185

    Parameter
    PH scale -2.0 to 20.0 pH -2.00 to 20.00 pH -2.000 to 20.000 pH
    MV ± 2000.0 mV
    Scale Ion Selective from 1.00 x 10 -7 to 9.99 x 10 10 units of concentration
    Scale temperature -20.0 to 120.0 ° C / -4.0 to 248.0 ° F
    PH resolution 0.1 pH 0.01 pH; 0.001 pH
    MV resolution 0.1 mV
    Resolution Ion Selective 3 significant digits; 0.01; 0.1, 1, 10 units of concentration
    Temperature resolution 0.1 ° C / 0.1 ° F
    Accuracy pH (at 20 ° C) ± 0.01 pH ± 0.002 pH
    Accuracy mV (at 20 ° C) ± 0.2 mV
    Accuracy selective ions (at 20 ° C) ± 0.5% of reading (monovalent ions), ± 1% of reading (divalent ions)
    Accuracy at 20 ° C temperature ± 0.4 ° C / ± 0.8 ° F
    Relative offset ± 2000.0 mV
    PH calibration Up to 5 point calibration with 7 standard buffers available (1.68, 4.01, 6.86, 7.01, 9.18, 10.01, 12.45) plus 5 user-definable buffers
    ISE calibration Up to 5 point calibration, 6 standard solutions (0.1, 1, 10, 100, 1000, 10000 ppm)
    Temperature Compensation Manual or automatic from -20.0 to 120.0 ° C / -4.0 to 248.0 ° F
    Probe HI 72911B combined pH and temperature probe, steel shell, BNC + RCA cable (included)
    Storing a sample 300 samples (100 per parameter)
    Interfaces USB opto-isolated
    Input Impedance 10 12 Ohm
    Supply 4 rechargeable batteries (1.2V AA) – 200 hours of continuous use (with backlight off), auto-off selectable
    Terms of use from 0 to 50 ° C; RH max 100% (IP67)
    Dimensions and weight 226 x 95 x 52 mm / 525 g

    Accessories HI 98185

    HI 1230B Combined pH electrode with plastic body, double junction, gel-filled, BNC connector, 1 m cable
    HI 3230B ORP combination electrode with plastic body, platinum sensor, gel-filled, BNC connector, 1 m cable
    HI 4101 Combined electrode for ammonia ISE
    HI 4102 Combined Electrode ISE bromides
    HI 4105 Combined Electrode ISE carbon dioxide
    HI 4110 Combined electrode for fluoride ISE
    HI 4113 Combined electrode for nitrate ISE
    HI 4115 Combined Electrode ISE silver / sulfide
    HI 5004 Solution pH 4.01, 500 mL, ± 0.01 pH, with certificate of analysis
    HI 5007 Solution pH 7.01, 500 mL, ± 0.01 pH, with certificate of analysis
    HI 5010 Solution pH 10.01, 500 mL, ± 0.01 pH, with certificate of analysis
    HI 5016 Solution pH 1.68, 500 mL, ± 0.01 pH, with certificate of analysis
    HI 5068 Solution pH 6.86, 500 mL, ± 0.01 pH, with certificate of analysis
    HI 5091 Solution pH 9.18, 500 mL, ± 0.01 pH, with certificate of analysis
    HI 5124 Solution pH 12.45, 500 mL, ± 0.01 pH, with certificate of analysis
    HI 7021L ORP test solution at 240 mV, 500 mL
    HI 7022L ORP test solution at 470 mV, 500 mL
    HI 70300L Electrode storage solution, 500 mL
    HI 7061L Electrode cleaning solution, general use, 500 mL
    HI 710042 Induction charger for portable series HI 98180
    HI 72911B PH electrode with integrated temperature sensor, BNC connector and 1 m cable
    HI 76405 Electrode stand with steel base
    HI 7662 Thermistor temperature probe
    HI 92000 Windows ® compatible software for PC connection

  • สนใจขอใบเสนอราคาและสั่งซื้อสินค้า

    บริษัท ไฮเออร์ เอ็นท์เตอร์ไพรส์ จำกัด
    131 อุทยานวิทยาศาสตร์ประเทศไทย อาคารกลุ่มนวัตกรรม 1 
    ต. คลองหลวง อ.คลองหลวง จ. ปทุมธานี 12120
    โทร. 081-847-6768, 02-191-3928 แฟ็กซ์. 02-191-3929 


    คุณโทณิวัฒน์ 085-811-4779 , คุณนารีรัตน์ 085-814-9653

    E-mail : info@highents.com , IDline: @alltestkit

     

    >> ขอใบเสนอราคาแบบออนไลน์ คลิก !! <<